slip ring

The capsule conductive slip rings produced by Jiachi Electromechanical are widely used in a series of industries such as rotating light boxes, rotating monitoring, and anchor fish equipment. Because of their rotating and conducting characteristics, many customers have solved the problem of equipment rotating and winding.

This conductive slip ring has been widely used in various industries and fields. After time-tested, it fully shows that the various performance parameters of this conductive slip ring are very reliable. It has been recognized by the majority of customers. The assembly of this conductive slip ring has gone out of the country because of its wide application, and has been exported to dozens of countries in the world, and has been recognized by customers all over the world.

Conventional cable winches come in two forms. One is the non-slip ring winch, the other is the end slide ring winch. The former can only be used to store cables, and cables still need to be removed or connected when retracting or releasing cables; The latter because of the use of end slip ring, and the use of ordinary brush, easy to cause brush contact is not close, causing phase loss, heating and other faults, can only be used in the requirements of low, low current occasions

Uav is the product of modern science. Due to its advantages such as simple operation, less restrictions on takeoff and landing sites, good stability and safety, it has been applied to various industries. Even when we go out to play, we can often see UAV. Its main function is to take photos. In some special environments, aerial shooting with drones can definitely achieve different shocking effects.

As a precision component, conductive slip ring has gradually begun to be used in civilian fields. Compared with the technology on the equipment, the conductive slip ring of the amusement park is still traditional. The carousel conductive slip ring uses a carbon brush block to contact the loop to transmit power and signals.

In addition to the above multi-channel scheme design, the application of conductive slip ring in the lighting industry is also only in other special cases, such as large current through, the lamp is exposed to the outdoors, etc. Special consideration should be given to the contact of the current guide device, the contact material of the conductive ring and the brush, and the installation method. Keep the safety and guarantee life, will not easily fall off the chain in the process of use, which is the urgent problem to be solved in the application of high-current conductive slip ring in the lighting industry.